800-867-8426 ? info@opticomm.com ? www.opticomm.com ? contact opticomm for custom requirements. * chromatic dispersion and additional losses should be taken into account optical 1510 1530 1550 wavelength fiber output receiver loss conn cwdm cwdm cwdm type mode suffix type power sensitivity budget range* type ?? ? laser sm l4 09/125 -8 dbm -20 dbm 12 db 5 km fc one channel, 160mhz monochrome and full duplex audio & rs-232 data system for ultra hi-resolution remote displays over one fiber the RGB-4500 is an amplitude modulated (am), laser-based monochrome-compatible video transmission system with sync accepted on green, with one channel full duplex audio and rs-232 full duplex async data. all signals are cwdm over one singlemode fiber. it is ideal for the extension of a high resolution radar video signal with intercomm audio and async data operation graphics workstation. units come with a built-in automatic gain control (agc) to maintain constant video, audio and data output, and a status indicator for power on. system design all units come in a 19? rack mount 1ru housing, which consists of a video card and audio & data cards, all assembled in a 1ru unit, allowing for greater flexibility and future expansion. the unit can be rack mounted (rm) with the ear flanges provided (option: unit can sit on a flat surface as a standalone (sa) unit with no ears). each unit operates with an appropriate internal power supply. the regulated switching power supply has short circuit protection, and an input operating voltage of 85-265 v ac . features ? ultra high-resolution (1792 x 1536) ? single-mode cwdm operation over one fiber ? 160 mhz video bandwidth ? ideal for radar applications ? true dc restoration ? flat frequency response ? complies with rs-170, rs-170a & 343 eia standards ? no emi or rfi and no ground loops ? 19? 1ru rack-mountable (optional 17? standalone) ? ideal for graphics workstation extensions RGB-4500 single fiber hi-res video, duplex audio & rs-232 duplex data
emissions: fcc part 15, ices-003, as/nzs, 3548, en55022 immunity: envs0204, en61000-4-2,3,4,5,6,11 safety: ul1950, can/csa 22.2, no.950-95 made in the usa rgb/vga/dvi video video in/out impedance 75 ? video in/out level 1 volt peak to peak, 0.7 volts without sync video bandwidth 10 hz to 160 mhz @ -3db grayscale linearity distortion < 2.0 % typical pixel intensity distortion < 2.0 typical linearity 1.1 % typical tilt 0.5 % typical maximum horizontal frequency 128 khz maximum refresh rate 120 khz signal to noise ratio >52 db using rs-250c standards @ 1 km connector type bnc audio channels 1 duplex audio @ 24 bits audio in/out impedance 600 ? or 47k ? - balanced or unbalanced audio in/out level -6 to +6 dbm frequency response 10 hz to 20 khz @ -3db signal to noise ratio > 90 db @ 1 khz (weighted) total harmonic distortion < 1.0 %, 1 khz at maximum modulation connector type micro db25 data rs-232 dc-1 mbps pin male connector type micro db25 general dimensions 1ru rack mount (rm): 19? l x 7.25? w x 1.75? h (optional: standalone (sa): 17? l x 7.25? w x 1.75? h) material aluminum casing operating temperature -20 c to +70 c storage temperature -30 c to +85 c humidity 0 to 95% non-condensing operating voltage 85-265 vac50/60 hz @ 100 ma diagnostics status monitoring led indication sample configuration optiva ? configurable communication platform network management sdi & hd-sdi composite video, audio & data rgb/vga/dvi audio/fsk/intercom data (ethernet/serial/usb) catv/rf & l-band optical switching, routing & redundancy passive multiplexing solutions enclosures, racks & frames power supplies & accessories
|
